GUIDELINE FOR THE USE OF PROFESSIONAL STAMPS BY MEMBERS OF THE ASSOCIATION OF THE CHEMICAL PROFESSION OF ALBERTA

NOTE: These Guidelines are still in draft and subject to revisions.

The professional stamp issued by the Association of the Chemical Profession of Alberta (ACPA) is a representation of the professional responsibility, competence, and accountability of the Professional Chemist (P.Chem.) whose name and membership number appear on the stamp. The use of a professional stamp is a privilege and shall be exercised only in accordance with the Professional Chemists Regulation (248/2001) and ACPA bylaws.

‘The Regulation establishes the Association of the Chemical Profession of Alberta (ACPA) as the self-governing professional regulatory organization that is responsible for the registration, licensure, regulation and discipline of those persons holding a Professional Chemist designation in Alberta. The Regulation defines the profession’s practice and grants title protection rights to ACPA members.’

A P.Chem. shall exercise due professional judgment and shall not affix, authorize, lend, transfer, reproduce, or otherwise permit the use of their professional stamp on any document, report, drawing, record, declaration, or other professional work unless they have personally reviewed the work to the extent necessary to accept professional responsibility for its contents.

NOTE

Professional Chemists are responsible and accountable for any statements or information presented in professional documents regardless of whether they have included the title of P. Chem. or affixed their stamp to the document.

Description

Inside the hexagon and wrapped around the circle is the full name of our association.

Inside the circle is the member’s registration number and a space for signatures, initials or handwritten dates.

Between the lines is the member’s name, abbreviated to fit as necessary. As is usually the case with professional stamps, members must provide a version of their name or initials that will fit in with the space provided.

Below the member’s name is the member’s official title in full: “Professional Chemist”.

The following are guidelines on how a member’s stamp should be used:

General

  • Where required by legislation or regulation, members are required to use their stamp.
  • Where not required by legislation or regulation, as is the case for the moment, the use of the professional stamp is encouraged to increase exposure and public confidence that Professional Chemists are engaged.
  • The stamp can be applied to publications, monographs, reports, special letters, plans, documents, and drawings, prepared and delivered by the registered member, or for which they are directly responsible.
  • Routine communications (like e-mails, for example) need not be stamped, but should include the designation, P. Chem., after the member’s surname.
  • The mark from a member’s stamp indicates he or she stands behind the content of the stamped document.

Use of the Stamp

  • Members should stamp only those documents that were prepared by them or were directly under their supervision and control.
  • Stamps should be applied in a clear and legible manner.
  • The mark from a member’s stamp should be placed at the bottom of the document (or final page), or where a space is provided.
  • Only the member shall affix the mark from his or her stamp and shall initial or sign, and date the imprint.  The color of the signature should be different from the stamp.
  • If a report is presented, the imprint should appear on the bound title page or the final page of the report.
  • Many client groups have or will develop their own procedures for imprinting documents. This guideline is not intended to supersede or replace contractual arrangements already in place. 
  • Provisions for digital use shall be acceptable. An electronic image of the professional’s stamp is acceptable. For more information to create a digital signature or stamp, or to authenticate an electronic document using a digital signature, please go to notarius.com. Note that the document is stamped first and then digitally signed to guarantee its integrity.

Procedure for multiple contributors

Reports that include several disciplines are stamped by each professional member taking responsibility for the work within their discipline and following their profession’s regulatory standards.

Revisions to Stamped Documents

Revisions to a document issued by, or under the direct supervision and control of, the same professional member(s) responsible for the original document should be clearly identified as revisions to the original document.  The original professional stamp(s) should be re-dated to indicate the date of the revision and initialed by the respective professional member(s)

When revisions to a document are made by someone other than the professional member(s) responsible for the content of the original document, the revisions only, including all elements of the document which are affected by the revisions, should be stamped, signed and dated by the professional member(s) under whose direct supervision and control the revisions were made.  Care should be taken in documenting revisions to clearly identify the boundary of professional responsibility between the original and revised documents.

Stamp Ownership

A professional chemist shall only use their stamp while they are registered as a member ‘in good standing’.

ACPA Bylaw.

13.11 Member in Good Standing – A member in good standing is any registered member who has not withdrawn, not been suspended or expelled, not failed to pay the required membership fee within sixty (60) days after the annual renewal date prescribed by the Board, and not failed to meet the professional course requirements and the professional development requirements set by the Board. Only a member in good standing has any membership rights, privileges, or powers.

When a member holding a stamp ceases to be a registered member of the ACPA, s/he must cease all use of their stamp. The members’ stamp remains the property of the ACPA and shall be returned upon request of the Association following due process.  Its safe custody, direct control at all times, and its appropriate use is the responsibility of the stamp holder. A P.Chem. shall take reasonable measures to safeguard their professional stamp and shall promptly notify the Association if the stamp is lost, stolen, compromised, or used without authorization.

Professional Responsibility

The onus is on the member to ensure that his/her application of the stamp is done in a legal, ethical and professional manner. It is the responsibility of the member to be aware of any legal or employer limitations or requirements regarding the use of the stamp. ACPA assists by providing general guidelines only.

Professional chemists are only permitted to take responsibility for work completed in Alberta.